At Cloom Tech, as a trusted wire harness supplier, we manufacture and assemble custom wiring harnesses for Australian OEMs that require precise conductor routing, connector termination, and assembly to drawing.
We fabricate high-quality electrical wiring harnesses for machinery, transport systems, industrial controls, and embedded equipment.
Cloom Tech fabricates and ships custom wiring harness solutions to Australian-based OEMs that require assemblies built to your detailed technical drawings. We manufacture each unit to match exact specifications for routing, connector types, jacket materials, and environmental durability.
Whether you need after-market replacement assemblies or consistent output for serial production, we deliver wiring harnesses Australia buyers can rely on for accuracy, compliance, and repeatable performance across equipment classes.
For off-road vehicles and mobile platforms, we supply wiring harnesses manufactured for vibration, impact, and exposure.
Our team assembles the wire harnesses to your drawing using abrasion-resistant sleeves, sealed connectors, and heavy-duty crimps.
We assemble each electrical harness according to submitted BOMs and schematic files.
These cable assemblies support PLCs, motor controllers, and panel-based machinery with clearly labelled conductors and verified terminal integrity.
We produce custom wiring sets for compact enclosures where space and bend radius must be controlled.
Our technicians route and terminate all cables to exact length, with connector placement matching component layout.
Harnesses for inverters, charge controllers, and power interface boards are built for current rating, cable length, and grounding requirements as defined in your documentation.
We apply continuity and insulation tests to all units before shipping.
We assemble custom wiring harnesses with split paths, connector branches, and fixed tie positions, including tractor wiring looms for agricultural applications. These builds reduce installation time and meet strict space or enclosure requirements.
Harnesses can be manufactured using abrasion-resistant sleeves, flame-retardant jackets, and high-flex conductors. These high quality wiring and electrical solutions support performance in harsh environmental conditions or exposed applications.
Cloom Tech supplies OEM replacement wiring harnesses manufactured to match form, fit, and electrical function. These are ideal for after-market service or field unit retrofitting.
Every harness is fully labelled to your spec and verified for continuity and pinout. We support top quality output through batch control and test data retention for all completed wiring solutions.
We customise harnesses based exactly on your drawings and BOMs. Every wire is cut to the specified length, stripped to precise tolerance, and terminated with the correct tool and die for each connector type. This ensures reliable integration of every wiring harness Australia customers receive, with no part mismatches or undocumented deviations.
Cloom Tech sources components from global suppliers, including Molex, Amphenol, TE, and JST. Wire types include PVC, XLPE, and Teflon jackets, with copper conductor options for signal and power. We match conductor size, insulation type, and terminal fit to drawing requirements and material callouts.
The process includes automatic wire cutting, dual-stage insulation stripping, ferrule or terminal crimping, conductor grouping, and sheath application. Harnesses are bundled and tied per mechanical layout, with label placement matching the documentation for traceability and installation routing.
Our production lines support output of up to 10,000 harnesses per hour, depending on harness complexity, conductor count, and termination type.
We operate programmable wire processors, pneumatic crimp tools, and semi-automated labelling machines. Manual assembly benches are used for complex, low-volume harnesses where inline termination or part-specific tooling is required. Tooling is checked for calibration before each shift.
Assemblies are visually inspected during each stage and electrically tested at final QC. Continuity and pinout are verified with connector-specific fixtures. Where required, we apply mechanical pull testing and insulation resistance checks under load conditions.
All harnesses are built under ISO 9001 and IATF 16949 quality systems and conform to IPC/WHMA-A-620 Class 2 or Class 3 criteria, depending on the application. Materials are traceable, RoHS compliant, and optionally UL recognised based on the customer’s sourcing and compliance instructions.
We assemble all harnesses using the wiring diagrams, layout files, and BOMs you provided. No substitutions, adjustments, or part swaps are made without your instruction.
Production follows ISO 9001, IATF 16949, and IPC/WHMA-A-620 Class 2 or Class 3 standards, depending on the application and tolerance requirements.
Cloom Tech works with trusted suppliers such as Molex, JST, Amphenol, and TE. We source terminals, housings, insulation, and jackets to match part numbers and mechanical specifications.
Our facilities support low-volume runs and large-batch production, with documented test plans and output capacity reaching 10,000 assemblies per hour on automated lines.
Your custom wiring harnesses are traceable by lot and undergo both in-process and final inspection. Fixture-based testing confirms continuity, pinout, and connector engagement.
We pack orders to prevent deformation, label them for traceability, and ship them with full documentation. We support customs documentation and local delivery requirements for Australian clients.
Cloom Tech follows a validation workflow for every harness. These steps verify performance, detect assembly faults, and prevent wiring that fails when challenged by real-world operating conditions. By detecting issues early, we help ensure that there’s limited disruption or downtime during installation or service.
Every conductor undergoes testing for a complete electrical path. Open circuits, reversed pinouts, or missing terminations are flagged before packing.
Our team inspects terminals for correct conductor position, deformation, and tensile retention. This confirms mechanical strength under pull load.
We test wiring harness assemblies using custom jigs to confirm that wire positions match client-supplied diagrams and function maps.
Technicians measure each exposed conductor for compliance with strip length tolerances and review outer cable assemblies for jacket damage or incorrect routing.
Harnesses undergo functional test procedures aligned to product class. These include high-voltage insulation resistance or continuity checks under load.
Harnesses undergo functional test procedures aligned to product class. These include high-voltage insulation resistance or continuity checks under load.
We craft each product to ensure reliability, security, durability, and optimal performance.
Cloom Tech delivers top-quality harnesses and custom solutions for customers who need precise, specification-driven builds from a reliable team of experts in cable and wiring assembly.
We sincerely appreciate the professionalism you’ve demonstrated. Your effort to thoroughly understand the project lays a solid foundation for a successful collaboration.
We are excited about the possibility of working together on future projects and are confident that this collaboration will continue to thrive. Thank you for your hard work and dedication!
Thank you for sharing such thoughtful and detailed questions. Your meticulous approach and depth of inquiry reflect your genuine commitment to achieving a high-quality outcome.
By asking the right questions and paying close attention to every detail, you’ve demonstrated a level of professionalism and care that sets you apart. We look forward to continuing this collaboration and are confident in the quality of results you will bring.
Everything arrived in perfect condition, surpassing our expectations in both quality and service. Cloom Tech’s dedication to excellence made this project a great success.
Your professionalism and hard work were outstanding, and we’re excited to partner with you again on future projects with complete confidence and trust.
Thank you for delivering our custom wiring harnesses on time and meeting all our quality expectations. The shipment was prompt, and every item passed inspection perfectly.
Your dedication to detail and excellence truly sets you apart as a trusted partner. We’re excited to continue working together on future projects!
I received the shipment of cable assembly and wanted to take a moment to thank you and your amazing team.
The quality of the work is fantastic, and I’m genuinely impressed. Well done to everyone involved! Your dedication and attention to detail are truly appreciated. I look forward to continuing our collaboration.
FAQ’s
Yes. We accept prototypes or low-volume runs, with volume depending on complexity. Manual tooling is used where full automation isn’t justified.
Yes. Upon request, we source RoHS-compliant wire, terminals, and jackets. UL-rated materials and part certificates are available depending on supplier availability and BOM requirements.
Yes. Cloom Tech can supply a certificate of conformity, and inspection report for each batch, based on your project requirements.
Standard lead times are 2 to 3 weeks for prototypes and 4 to 5 weeks for volume production, depending on wiring harness complexity, component sourcing, and order size. All schedules are confirmed at the time of the quote.
As established wiring harness manufacturers Australia trusts, Cloom Tech manufactures custom wiring solutions to exact client drawings, supporting consistent quality, reduced downtime, and repeatable integration across production environments.
